Double-shafts shredder: Model B-70/100S

You are here

Double-shafts shredder: Model B-70/100S


Main technical characteristics:
  • Cutting chamber: 690x1000 mm
  • installed horsepower: 2 KW + 22 KW
  • drive: gears through oil bath reduction gear
  • n. Cutter shafts: 2
  • n. Hardened cutters: 25
  • Cutters diameter: 430 mm
  • Cutters thickness: 40 mm
  • n. spacing combs: 25
  • n. average cutter revs./min.: 16
  • production: 1,4-2 t/h
  • safety precautions: emergency stop, reversal system in case of overloading
  • manufactured to EC standards.
  • interchangeable hopper;
  • loading and unloading belt
  • base size to order;
Explanatory notes:

Very multipurpose machine suitable for shredding an enormous number of waste materials- even very large. It can be introduced into a line to operate in continuous working.
Recommended for shredding pieces of wood, rags, plastic blocs leather, small tyres, paper, cardboard, packaging, polyethylene banding, plastic film, etc.

Characteristics of shredder:
  • Very thick welded sheet steel support;
  • Support for barrel roller bearings with sealing system against dust and liquids;
  • High thickness shafts with 25 special anti-wear steel cutters and 25 spacers to facilitate unloading of shred material:
  • New graduated arrangement of cutter teeth for better taking and cut progress;
  • N.2 epicyclic reduction gears with rotation axes parallel to the cutter axis;
  • N. 2 motors of 22 KW for a total of 44 KW;
  • Drive system in oil bath with steel gears and pinions ;
  • 680x1000 mm. cutting chamber;
  • Welded sheet metal hopper for top loading;
  • Base made in steel tubular equipped with protection nets or arranged for the belt.
  • Weight: 5800 kg.
Characteristics of control system:
  • Electrical board built according to CEE rules and provided with power limiting device inverting cutters motion in case the working charge of the machine is higher than the programmed value;
  • PLC SIEMENS S7-1200 for the control of all the plant peripheral units.
  • Display touch screen SIMATIC SIEMENS for the regulation of every parameter of the machine;
  • Software to command charging systems, refiner grinder and aspiration system;
  • Emergency control functions for stopping the plant in the case of accidental introduction of ferrous material.
  • ISVE MAINTENANCE PROGRAM: due for maintenance on touch screen;
  • The production of shredded material varies according to the type of the items to be shredded and the size required. A production of between 1,4-2 t/h can be roughly estimated.
  • Made to CE standards.