"TRITOTUTTO" SHREDDING MODELS: description and technical data

You are here

"TRITOTUTTO" is a rotating blade grinder that has been designed for use in small to medium sized firms to reduce the volume of scrap in order to store its in silos or to facilitate their disposal.
They are machines that have a low electrical input, run silently and are very reliable. Reliability is a consequence of the instalation of a torque limiting device which can be adjusted according to the product to be ground.
It can be used to reduce the volume of scrap from: plastic materials, cardboard, packing materials, wood, hide, leather, nut shells and fruit stones, wood bark, loppings of trees.
It can be connected to an aspirator using a tube placed under the screen.

Common features

The machine is driven by an epicyclical reduction gear whereas the linkage between the cutter holders and conveyors is by oil bath lubricated gears.
Each machine is equipped with a set of spanners to carry out disassembly of the cutters should they need sharpening. A clear technical manual illustrates the methods of carrying out this operation.

All the models are equipped with screens varying from 14 to 38 mm depending on the size of the shredded material required. The smaller the size required the less the machine will produce.

The other features of these machines are:
- Operating noise less than 80 dB: silent shredders
- shredder and conveyor disks easy to access to facilitate maintenance
- interchangeability of disks carried out directly by user
- low energy consumption
- possibility to shred any nonferrous material, even in the presence of nails, metal wire or stones and rocks
- EC certification.

Four-shafts shredders: Model 2566

Four-shafts shredders: Model 2566 Main characteristics: Cutting chamber: 250x660 mm installed power: HO 7,5 drive: by gears n. Cutter shafts: 2 n. Hardened cutters: 13 n. Conveyor shafts: 2 n. conveyor disks: 13 n. average cutter revs./min.: 25 production: 80-150 kg/h... More

Four-shafts shredders: Model 4080S

Four-shafts shredders: Model 4080S Main technical characteristics: Cutting chamber: 400x800 mm installed power: 15 kW (7,5 kW + 7,5 kW) drive: by gears n. Cutter shafts: 2 n. Hardened cutters: 20 n. Conveyor shafts: 2 n. conveyor disks: 20 n. average cutter revs./min.: 18... More

Four-shafts shredders: Model 6080S

Four-shafts shredders: Model 6080S Main technical characteristics: Cutting chamber: 600x800 mm installed horsepower: 15 kW (7,5 kW + 7,5 kW) drive: gears n. Cutter shafts: 2 n. Hardened cutters: 30 n. Conveyor shafts: 2 n. conveyor disks: 30 n. average cutter revs./min.: 18... More

Four-shafts shredders: Model 8080S

Four-shafts shredders: Model 8080S Main technical characteristics: Cutting chamber: 800x800 mm installed power: 15 kW (7,5 + 7,5 kW) or 22 kW (11 + 11 kW) drive: by gears n. Cutter shafts: 2 n. Hardened cutters: 42 n. Conveyor shafts: 2 n. conveyor disks: 42 n. average... More

Four-shafts shredders: Model 10080S

Four-shafts shredders: Model 10080S Main technical characteristics: Cutting chamber: 1000x800 mm installed power: 15 kW (7,5 + 7,5 kW) or 22 kW (11 + 11 kW) drive: by gears n. Cutter shafts: 2 n. Hardened cutters: 52 n. Conveyor shafts: 2 n. conveyor disks: 26 n. average... More

Four shafts shredder model 80-90S

Shredder model 80-90S   Principali caratteristiche: cutting chamber:800x1000 mm installed power:44 KW (22 kW+22 kW) - 60 HP (30HP+30HP) drive: by gears number of cutting shaft: 2 number of knives  (sp. 25mm): 32 number of Conveyor shafts: 2 n. conveyor upper... More

Four-shafts shredders: Model 80-100S

Four-shafts shredders: Model 80-100S Main technical characteristics: Cutting chamber: 800X1000 installed power: 37 kW (18,5 kW + 18,5 kW) drive: by gears n. Cutter shafts: 2 n. Hardened cutters: 20 n. Conveyor shafts: 2 n. conveyor disks: 20 n. average cutter revs./min.: 18... More

Four-shafts shredders: Model 100-100S

Four-shafts shredders: Model 100-100S Main technical characteristics: Cutting chamber: 1000X1000 installed power: 37 kW (18,5 kW + 18,5 kW) drive: by gears n. Cutter shafts: 2 n. Hardened cutters: 25 n. Conveyor shafts: 2 n. conveyor disks: 25 n. average cutter revs./min.: 18... More

Four-shafts shredders: Model 160160S-MAX

Four-shafts shredders: Model 160160S-MAX The “heavy” 4-shaft shredder 160160S-SERIE MAX has a charging inlet of 1.600X1.600mm and it is equipped with 2 conveyor shafts in addition to cutters. This shredder is equipped with 4 gearmotors for a total power of 150 kW and it develops a very... More

Four-shafts shredders: Model 120-100S

Four-shafts shredders: Model 120-100S Main technical characteristics: Cutting chamber: 1000x1200 installed power: 44 kW (22 kW + 22 kW) drive: by gears n. Cutter shafts: 2 n. Hardened cutters: (thickness 40mm) 30 n. Conveyor shafts: 2 n. conveyor disks: 30 n. average cutter... More

Four-shafts shredders: Model 120130S-MAX

Four-shafts shredders: Model 120130S-MAX The 120/130S-MAX 4-shafts shredder is an heavy machine withj a 1.200x1.300 mm load door and is equipped with special conveyor disks besides the cutters. This model is provided with 4 gearmotors with total power of 81 kW with high force of cut.... More